Filters: Tags: 3D Elevation Program (X) > partyWithName: U.S. Geological Survey - ScienceBase (X)
26 results (60ms)|
Filters
Date Range
Extensions Types Contacts
Categories Tag Types Tag Schemes
|
Located in the northern tropical Pacific Ocean, Majuro is the capital of the Republic of the Marshall Islands. Majuro Atoll consists of a large, narrow landmass and a set of smaller perimeter islands surrounding a lagoon that is over 100 square miles in size. The waters surrounding the Majuro Atoll land areas are relatively shallow with poorly mapped bathymetry. However, the Pacific Ocean on the exterior of the coral atoll and the lagoon within its interior consist of deep bathymetry with steep slopes. The highest elevation of the Majuro Atoll is estimated at only 3-meters above sea level, which is the island community of Laura located on the western part of the atoll. At the eastern edge of the atoll lies the capital...
Categories: Data;
Tags: 3D Elevation Program,
3DEP,
American Society of Photogrammetry and Remote Sensing,
Base Maps,
Bathymetric,
U.S. Geological Survey (USGS) scientists completed a multidisciplinary data collection effort during the week of October 21-25, 2019, using new technologies to map and validate bathymetry over a large stretch of the non-tidal Potomac River. The work was initiated as an effort to validate commercially-acquired topobathymetric light detection and ranging (lidar) data funded through a partnership between the USGS and the Interstate Commission on the Potomac River Basin (ICPRB). The goal was to compare airborne lidar data to bathymetric data collected through more traditional means (boat-based sonar, wading Real Time Kinematic Global Navigational Satellite System (RTK-GNSS) surveys) and through unmanned aerial systems...
This section of the data release includes the spatial metadata geospatial polygon feature dataset (.shp file) that contains spatial footprints for each input source dataset used to develop the topobathymetric dataset of Great Salt Lake. The attributes for each footprint polygon describe the characteristics of each input dataset used to generate the topobathymetric dataset.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 3D Elevation Program,
3DEP,
Acoustic Sonar,
Antelope Island,
Bear River,
These data provide spatial information about USGS 3D Elevation Program (3DEP) Broad Agency Announcement (BAA) and Data Collaboration Announcement (DCA) lidar data acquisition projects from Fiscal Year (FY) 2015 to present, including the FY, state, project name, project size, award recipient, lidar quality level (QL), contracting mechanism, and project description.
U.S. Geological Survey (USGS) scientists conducted field data collection efforts during the week of September 25 – 29, 2017, using a combination of conventional surveying technologies, for a large stretch of the Kootenai River near Bonners Ferry, Idaho. The work was initiated as an effort to validate commercially acquired topobathymetric light detection and ranging (lidar) data. The goal was to compare the airborne lidar data to topographic and bathymetric data collected through more traditional means (e.g. waded Real-Time Kinematic Global Navigation Satellite System (RTK-GNSS) surveys). The validated topobathymetric lidar data will be used for hydrologic modeling, assessment and restoration of aquatic habitat,...
To support the modeling of storm-induced flooding, the USGS Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Central California Coast. High-resolution coastal elevation data is required to identify flood, hurricane, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. The new TBDEM consists of the best available multi-source topographic and bathymetric elevation data for the onshore and offshore areas in Central California. The Central California TBDEM integrates 70 different topographic and bathymetric data sources...
To support the modeling of storm-induced flooding, the USGS Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for Puget Sound. Puget Sound is located along the northwestern coast of Washington and is part of the Salish Sea. Puget Sound is the third largest estuary in the United States. High-resolution coastal elevation data is required to identify flood, storm, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. The new TBDEM consists of the best available multi-source topographic and bathymetric elevation data for Puget...
This section of the data release includes the topobathymetric elevation dataset of Great Salt Lake as an assimilated raster comprising interpolated bathymetry from 2005 and 2006 (Baskin, 2005; Baskin, 2006) and QL1 and QL2 lidar from 2016 (Utah Geospatial Resource Center, 2016). The bathymetric dataset was originally published as contour maps. The contours were interpolated to develop a digital elevation model that is readable by a geographic information system and compatible with topographic lidar data generated in 2016. Because the water elevation of Great Salt Lake has declined since 2005, regions of the bathymetric and lidar datasets overlap to provide a reasonable estimate of error. The topobathymetric dataset...
To support the modeling of storm-induced flooding, the USGS Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Northern California Coast. High-resolution coastal elevation data is required to identify flood, hurricane, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. This TBDEM consists of the best available multi-source topographic and bathymetric elevation data for the onshore and offshore areas in Northern California. The Northern California TBDEM integrates 26 different topographic and bathymetric data sources...
To support the modeling of the Colorado River water storage area capacity tables by the U.S. Geological Survey (USGS) Utah Water Science Center in the Glen Canyon National Recreation Area in Utah and Arizona, the USGS Earth Resources Observation and Science (EROS) Center has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for Lake Powell, the second largest man-made reservoir in the United States. Located in south-central Utah and north-central Arizona, Lake Powell is a reservoir on the Colorado River created by the flooding of a natural canyon by the construction of Glen Canyon Dam. The new Lake Powell TBDEM consists of the best available multi-source topographic and bathymetric elevation...
U.S. Geological Survey (USGS) scientists conducted field data collection efforts between July 19th and 31st, 2021 over a large stretch of the McKenzie River in Oregon using high accuracy surveying technologies. The work was initiated as an effort to validate commercially acquired topobathymetric light detection and ranging (lidar) data that was collected coincidentally between July 26th and 30th, 2021 for the USGS 3D Elevation Program (3DEP). The goal was to compare and validate the airborne lidar data to topographic, bathymetric, structural, and infrastructural data collected through more traditional means (e.g., Global Navigational Satellite System (GNSS) surveying). Evaluating these data will provide valuable...
U.S. Geological Survey (USGS) scientists conducted field data collection efforts during the time periods of April 25 - 26, 2017, October 24 - 28, 2017, and July 25 - 26, 2018, using a combination of surveying technologies to map and validate topography, structures, and other features at five sites in central South Dakota. The five sites included the Chamberlain Explorers Athletic Complex and the Chamberlain High School in Chamberlain, SD, Hanson Lake State Public Shooting Area near Corsica, SD, the State Capital Grounds in Pierre, SD, and Platte Creek State Recreation Area near Platte, SD. The work was initiated as an effort to evaluate airborne Geiger-Mode and Single Photon light detection and ranging (lidar) data...
To support Hurricane Florence impact modeling of storm-induced flooding and sediment transport, the U.S. Geological Survey (USGS) Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for coastal Georgia. High-resolution coastal topobathymetric data are required to characterize flooding, storms, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. This TBDEM consists of the best available multi-source topographic and bathymetric elevation data for Coastal Georgia including neighboring bays, estuaries, waterways, inlets, and...
To support U.S. Army Corps of Engineers (USACE) storm surge modeling for the Louisiana Coastal Protection and Restoration Authority (CPRA), Lowermost Mississippi River Management Program (LMRMP), the U.S. Geological Survey (USGS) Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Northern Gulf of Mexico (NGOM)-2. High-resolution coastal topobathymetric data are required to model flooding, storms, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. The new TBDEM consists of the best available multi-source topographic...
The U.S. Geological Survey (USGS) 3D Elevation Program (3DEP) has started to initiate the development of pilot 3D National Topography Models to generate 3-dimensional surface elevation models that integrate river topographic bare-earth elevation surfaces with channel bed bathymetry. Detailed knowledge of integrated river system topography, bathymetry, and topobathymetry, is essential for habitat restoration, hydrologic modeling, and other key science applications such as flood mapping and identification of fluvial geomorphic features. An integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Kootenai River near Bonners Ferry, Idaho, has been developed for this first pilot study. The Kootenai...
U.S. Geological Survey (USGS) scientists conducted field data collection efforts between March 8th and 25th, 2021 at four sites along coastal North Carolina and South Carolina using high accuracy surveying technologies. The work was initiated as an effort to validate a topobathymetric digital elevation model (TBDEM) produced for the area that was directly impacted by Hurricane Florence in 2018. The goal was to compare the airborne lidar and sonar derived TBDEM to data collected through more traditional means (e.g. Global Navigational Satellite System (GNSS) surveying). In addition, coastal dunes were mapped with ground based lidar (GBL) for computation of dune metrics. The Hurricane Florence TBDEM will support the...
U.S. Geological Survey (USGS) scientists conducted field data collection efforts between August 17th and 28th, 2020 over a large stretch of the Niobrara River in Nebraska using high accuracy surveying technologies. The work was initiated as an effort to validate commercially acquired topobathymetric light detection and ranging (lidar) data. The goal was to compare and validate the airborne lidar data to topographic, bathymetric, structural, and infrastructural data collected through more traditional means (e.g. Global Navigational Satellite System (GNSS) surveying). The airborne topobathymetric lidar data will be used for characterization of endangered species aquatic habitat, improving the understanding of fluvial...
This section of the data release includes tables in the format of comma-separated value (CSV) files with elevation-area-volume relationships for Great Salt Lake. The volume and area of Great Salt Lake were calculated from the topobathymetric raster dataset, which was resampled from 0.5-meter to 5.0-meter resolution, at elevation increments of 0.01 feet between 4,170.00–4,215.00 ft above the North American Vertical Datum of 1988. Data are provided as total values for Great Salt Lake as well as regional values for the north arm, south arm, Bear River Bay, and Farmington Bay.
This data release is associated with the following Scientific Investigations Report: Root, J.C. and Jones, D.K., 2022, Elevation-area-capacity relationships of Lake Powell in 2018 and estimated loss of storage capacity since 1963: U.S. Geological Survey Scientific Investigations Report 2022–5017, 21 p., https://doi.org/10.3133/sir20225017. This dataset provides elevation-area-capacity relationships for Lake Powell derived from a topobathymetric digital elevation model (TBDEM) that was collected in 2017 and 2018. The TBDEM was modified (Jones and Root, 2021, available for download at https://doi.org/10.5066/P9H60YCF) from the originally published version (Poppenga and others, 2020, available for download at https://doi.org/10.5066/P9XX0J1Y)...
U.S. Geological Survey (USGS) scientists conducted field data collection efforts during the weeks of September 9-13 and November 18-22, 2019, using a combination of technologies to map and validate topography, vegetation, and features in two areas of interest (AOI's) in north central Colorado. The western AOI included land managed by the Bureau of Land Management and the U.S. Forest Service. The eastern AOI included agricultural and urban areas. The work was initiated as an effort to test and evaluate the Leica Geosystems CountryMapper* sensor. The CountryMapper is a hybrid sensor that collects imagery and light detection and ranging (lidar) data simultaneously. The CountryMapper has the potential to collect data...
|
|
