Filters: Tags: Velocity (X) > Categories: Data (X)
32 results (90ms)
Filters
Date Range
Extensions Types Contacts
Tag Types
|
These data were collected using a 1200 kHz TRDI Rio Grande acoustic Doppler current profiler (ADCP) in mode 12 with 25 centimeter bins from a moving boat. The data were georeferenced with a Hemisphere Crescent A100 differential Global Positioning System (GPS) receiver with submeter accuracy. The data have been depth-averaged over the entire measured portion of the water column and temporally averaged over 5-second intervals to reduce noise. These data were collected by the U.S. Geological Survey (USGS) concurrently with environmental DNA (eDNA) sampling in this reach of the Chicago Sanitary and Ship Canal (CSSC) by the U.S. Fish and Wildlife Service (USFWS). Data were processed using the Velocity Mapping Toolbox...
Categories: Data;
Types: Citation,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Chicago Sanitary and Ship Canal,
Cook County,
DuPage County,
Illinois,
Velocity,
These data were collected using a 1200 kHz TRDI Rio Grande acoustic Doppler current profiler (ADCP) in mode 12 with 25 centimeter bins from a moving boat. The data were georeferenced with a Hemisphere Crescent A100 differential Global Positioning System (GPS) receiver with submeter accuracy. The data have been layer-averaged over the lower portion of the water column (0 to 4 meters above the bed). These data were collected by the U.S. Geological Survey (USGS) concurrently with environmental DNA (eDNA) sampling in this reach of the Chicago Sanitary and Ship Canal by the U.S. Fish and Wildlife Service (USFWS). Data were processed using the Velocity Mapping Toolbox (Parsons and others, 2013). NOTE: Any data assigned...
Categories: Data;
Types: Citation,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Chicago Sanitary and Ship Canal,
Cook County,
Illinois,
Velocity
Water velocities and water-quality constituents were measured along planned survey lines, which were generally perpendicular to the shoreline and spaced 100 meters apart, over an approximately 2.3-mile section of nearshore Lake Erie on June 10-12, 2019 (survey 1), and August 19-21, 2019 (survey 2), using a 1200 kHz acoustic Doppler current profiler (ADCP), a YSI 6920 V2 multiparameter sonde, and a YSI EcoMapper autonomous underwater vehicle (AUV). Water-quality data collected in this area included near-surface and three-dimensional measurements of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin (blue-green algae). The data were geo-referenced with an integrated...
Categories: Data;
Tags: Cleveland,
Easterly Wastewater Treatment Plant (WWTP),
EcoMapper,
Euclid Creek,
Lake Erie,
Survey of velocity and bathymetry in Hoover Reservoir, ADCP source data, Columbus, OH (August, 2015)
These data were collected using a 600 kHz Rio Grande ADCP (acoustic Doppler current profiler) in mode 12 from a moving boat. The data were georeferenced with a Hemisphere A101 Smart Antenna differential GPS. These data were processed with Teledyne RD Instruments' software, WinRiver II. These data were collected concurrently with several water quality parameters that were collected by an autonomous underwater vehicle (AUV) in the same reach. This data release supports the following publication: VonIns, B.L., and Jackson, P.R., 2017, Response of currents and water quality to changes in dam operations in Hoover Reservoir, Columbus, Ohio, August 24–28, 2015: U.S. Geological Survey Scientific Investigations Report 2017–5027,...
This dataset contains data collected during science flights using the drone-based QCam, which is a Doppler (velocity) radar designed to measure surface velocity and compute river discharge when channel bathymetry is known. Five science flights were conducted on four rivers including the Arkansas and South Platte Rivers in Colorado and the Salcha and Tanana Rivers in Alaska. Data are presented in a comma separated values (CSV) file.
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Alaska,
Colorado,
North America,
United States,
depth,
Introduction In 2012, Hurricane Sandy created an open breach in the barrier island system along the south shore of Long Island, N.Y. This breach formed at a location known as Old Inlet and migrated rapidly westward over the winter storm season following Hurricane Sandy. In response, the National Park Service sought assistance from the USGS New York Water Science Center to help evaluate the hydrodynamics and geomorphology of the breach. The evaluation is centered on measurement of water velocities and depths within the breach, and collection of water levels with the Great South Bay adjacent to the breach. This project is part of a larger ongoing study prepared in coordination with the National Park Service...
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Downloadable,
Map Service;
Tags: Acoustic Doppler Current Profiler,
ArcGIS,
Breach,
Climatology,
Downloadable,
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
Categories: Data;
Tags: Indiana,
Kentucky,
Louisville,
Markland Locks and Dam,
McAlpine Locks and Dam,
These data are bathymetry (river bottom elevation) in XYZ format (Easting, Northing, Elevation), generated from the September 17–18, 2020, survey of the Kentucky Dam tailwater from just downstream from Kentucky Dam to approximately 1,500 feet upstream from the I-24 bridge (about 1 mile total length). Bathymetric data were collected using an acoustic Doppler current profiler (ADCP) with an integrated global navigation satellite system (GNSS) smart antenna. The ADCP and GNSS antenna were mounted on a marine survey vessel, and data were collected as the survey vessel traversed the tailwater along planned survey lines. There was typically one reciprocal pair (two passes) of data collected per line. There was a total...
Categories: Data;
Tags: Gilbertsville,
Kentucky,
Kentucky Dam,
Tennessee River,
United States of America,
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
Categories: Data;
Tags: Indiana,
Kentucky,
Louisville,
Markland Locks and Dam,
McAlpine Locks and Dam,
This U.S. Geological Survey (USGS) Data Release provides velocity test data for assessing the effect of salinity tolerance on cyanobacteria associated with a harmful algal bloom in Lake Okeechobee, Florida, July 10 to 13, 2017. All data are reported as raw measured values and are not rounded to USGS significant figures. Water and algal bloom material were collected from Lake Okeechobee, Florida on July 7, 2017. This dataset includes continuous water-quality measurements take in the laboratory July 10 to July 13, 2017 measuring water temperature, specific conductance, salinity, pH, turbidity, dissolved oxygen, chlorophyll, and phycocyanin at five-minute intervals at velocities of 0.946, 0.271, and 0 feet per second...
Categories: Data;
Tags: Chlorophyll,
Continuously Measured,
Dissolved Oxygen,
Florida,
Harmful Algal Bloom,
These data are depth-averaged velocities measured by an acoustic Doppler current profiler (ADCP), as well as continuous depth-averaged velocities from a stationary location measured with an acoustic Doppler velocity meter (ADVM). These data were collected from the July 12-14, 2022, survey of the Ashtabula River near Ashtabula, Ohio. The location of the ADCP data are from approximately 1,500 feet upstream from the Bridge Street bridge to 3,000 feet upstream from the Bridge Street bridge. The ADVM data are from approximately 41° 53' 46.4"N, 80° 47' 39.5"W. ADCP data were collected using an integrated global navigation satellite system (GNSS) smart antenna with submeter accuracy. The ADCP and GNSS antenna were mounted...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: ADCP,
ADVM,
Ashtabula,
Bathymetry,
Ecology,
These data were collected using a 600 kHz TRDI Rio Grande acoustic Doppler current profiler (ADCP) in mode 12 with 50 centimeter bins from a moving boat. The data were georeferenced with a Trimble Ag132 differential Global Positioning System (GPS) receiver with submeter accuracy. The data have been depth-averaged over the entire measured portion of the water column and temporally averaged over 5-second intervals to reduce noise. These data were collected during water-quality surveys of the right bank of the Chicago Sanitary and Ship Canal (CSSC) and include low-velocity regions of the canal such as barge slips in addition to the main channel. Data were processed using the Velocity Mapping Toolbox (Parsons and others,...
Categories: Data;
Types: Citation,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Chicago Sanitary and Ship Canal,
Cook County,
DuPage County,
Illinois,
Velocity,
The Bathymetry surface was created by plotting depths of all data points collected relative to North American Vertical Datum of 1988 (NAVD 88), which was converted using the Vertical Datum Transformation tool created by the National Oceanic and Atmospheric Administration's (NOAA) National Geodetic Survey, Office of Coast Survey, and Center for Operation Oceanographic Products and Services. The elevation of the bathymetric raster surface was interpolated between these points in a GIS using a spline interpolator. A total of 432 points were used for interpolation. The points were used as the input to create a polygon feature class. The Spline tool was applied using the points and polygon to interpolate the bathymetric...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Acoustic Doppler Current Profiler,
Bathymetry,
Breach,
Fire Island National Seashore,
Long Island,
ADCP data were collected on July 31-August 1, 2013 in the Dresden Island Pool on the Des Plaines River using a Teledyne Rio Grande 1200 kHz Acoustic Doppler Current Profiler with integrated Trimble Ag162 GPS. On July 31-August 1, 2013 the Des Plaines River discharge also was approximately 2,000-3,000 cfs. ADCP data was collected in reciprocal pairs along cross-sections and along roughly streamwise oriented lines between cross-sections. The data are provided in: (1) a zipped folder containing classic ascii output files exported from WinRiverII software, and a README text file indicating which files are reciprocal pairs, and which files are streamwise oriented lines (2) a zipped folder containing KML files for each...
Categories: Data;
Types: Citation,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Des Plaines River,
Dresden Pool,
Illinois,
surface water (non-marine),
velocity
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
Categories: Data;
Tags: Indiana,
Kentucky,
Louisville,
Markland Locks and Dam,
McAlpine Locks and Dam,
The Bathymetry surface was created by plotting depths of all data points collected relative to North American Vertical Datum of 1988 (NAVD 88), which was converted using the Vertical Datum Transformation tool created by the National Oceanic and Atmospheric Administration's (NOAA) National Geodetic Survey, Office of Coast Survey, and Center for Operation Oceanographic Products and Services. The elevation of the bathymetric raster surface was interpolated between these points in a GIS using a spline interpolator. A total of 432 points were used for interpolation. The points were used as the input to create a polygon feature class. The Spline tool was applied using the points and polygon to interpolate the bathymetric...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Acoustic Doppler Current Profiler,
Bathymetry,
Breach,
Fire Island National Seashore,
Long Island,
This model archive contains the data and software application used to develop a two-dimensional hydrodynamic model of a 1.2 kilometer reach of the North Santiam River in Oregon. The Delft3D-Flexible Mesh modeling system was used to simulate flow conditions at a baseflow discharge of 25 cubic meters per second and thus provide spatially distributed predictions of depth and velocity throughout the reach. This model archive consists of four individual components: (1) information on the hydrodynamic model software application; (2) the topographic data used to construct the model grid and field measurements of water depth used to calibrate the model; (3) complete Delft3D model runs, including both the required inputs...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: North Santiam River,
Oregon,
depth,
hydrodynamic model,
model archive,
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
Categories: Data;
Tags: Indiana,
Kentucky,
Louisville,
Markland Locks and Dam,
McAlpine Locks and Dam,
The following spreadsheets contain discharge measurements that were used to develop rating curves for each stream gage. The numbers on each tab refer to the date the measurement was collected. Each spreadsheet contains distance, depth, and velocity measurements used to calculate discharge in centimeters and highlighted in yellow.
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
Categories: Data;
Tags: Indiana,
Kentucky,
Louisville,
Markland Locks and Dam,
McAlpine Locks and Dam,
|
|