Filters: Tags: oil (X) > Types: Downloadable (X) > partyWithName: U.S. Geological Survey - ScienceBase (X)
224 results (16ms)|
Filters
Date Range
Extensions Types
Contacts
Categories Tag Types Tag Schemes
|
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Denver Basin Province is located in eastern Colorado, western Nebraska, southern South Dakota, and eastern Wyoming encompassing all or parts of Pueblo, El Paso, Crowley, Lincoln, Kit Carson, Elbert, Teller, Douglas, Jefferson, Denver, Arapahoe, Adams, Washington, Yuma, Morgan, Weld, Broomfield, Boulder, Larimer, Logan, Sedwick,...
These mapped faults are modified from Plate 2, Principal structural features, Gulf of Mexico Basin (compiled by T.E. Ewing and R.F. Lopez) in Volume J, The Geology of North America (1991); Plate 2, Geologic map of the U.S. Appalachians showing the Laurentian margin and the Taconic orogen (compiled by D.R. Rankin, A.A. Drake, and N.M. Ratcliffe) in Volume F-2, The Geology of North America (1989); and Plate 9, Tectonic map of the Ouachita orogen (compiled by W.A. Thomas) in Volume F-2, The Geology of North America (1989). This dataset contains basic data and interpretations developed and compiled by the U.S. Geological Survey's Framework Studies and Assessment of the Gulf Coast Project. Other major sources of data...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: AL,
AR,
Anticlines,
Coal,
Coalbed Methane,
These data provide generalized outlines of major basins and uplifts in the Gulf Coast region modified after Plate 2, Principal structural features, Gulf of Mexico Basin (compiled by T.E. Ewing and R.F. Lopez) in Volume J, The Geology of North America (1991). This dataset contains basic data and interpretations developed and compiled by the U.S. Geological Survey's Framework Studies and Assessment of the Gulf Coast Project. Other major sources of data include publicly available information from state agencies as well as publications of the U.S. Geological Survey and other scientific organizations. In cases where company proprietary data were used to produce various derivatives such as contour surfaces, the source...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: AL,
AR,
Basins,
Coal,
Coalbed Methane,
The Mahogany ledge structure contour lines were needed to perform overburden calculations in the Piceance Basin, Colorado as part of a 2009 National Oil Shale Assessment.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: CO,
Colorado,
Earth science,
Economic geology,
Energy resources,
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Montana Thrust Belt Province is located in western Montana, encompassing all or parts of Beaverhead, Broadwater, Cascade, Deer Lodge, Flathead, Gallatin, Glacier, Granite, Jefferson, Lake, Lewis and Clark, Lincoln, Madison, Meagher, Mineral, Missoula, Park, Pondera, Powell, Ravalli, Sanders, Silver Bow, and Teton counties in...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 27 = Montana Thrust Belt,
502701 = Thrust Belt Paleozoic/Mesozoic Composite,
50270101 = Thrust Belt Conventional Gas and Oil,
50270102 = Sawtooth Range Structure Conventional Oil and Gas,
50270103 = Frontal Structures Conventional Oil and Gas,
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Southwestern Wyoming Province is located in northeastern Utah, northwestern Colorado and southwestern Wyoming, encompassing all or parts of Eagle, Garfield, Moffat, Rio Blanco, and Routt Counties in Colorado and all or parts of Carbon, Fremont, Lincoln, Sweetwater, Sublette, Teton, and Uintah Counties in Wyoming and all or parts...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503701 = Phosphoria Total Petroleum System,
50370101 = Sub-Cretaceous Conventional Oil and Gas,
503702 = Mowry Composite Total Petroleum System,
50370201 = Mowry Conventional Oil and Gas,
50370261 = Mowry Continuous Gas,
An ESRI TIN data model of the overburden material above the Mahogany bed was needed to perform calculations in the Uinta Basin, Utah and Colorado as part of a 2009 National Oil Shale Assessment.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: CO,
Colorado,
Earth science,
Economic geology,
Energy resources,
Cell maps for each oil and gas assessment unit were created by the USGS to illustrate the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells were then coded to indicate whether the wells included within the cell are predominantly oil-producing, gas-producing, are both oil- and gas-producing, or are dry or the type of production is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503401 = Phosphoria,
50340101 = Paleozoic-Mesozoic Conventional Oil and Gas,
503402 = Cretaceous-Tertiary Composite,
50340201 = Cretaceous-Tertiary Conventional Oil and Gas,
50340261 = Muddy-Frontier Sandstone and Mowry Fractured Shale Continuous Gas,
This coverage includes arcs, polygons and polygon labels that describe Arctic portion of the U.S. Geological Survey defined geologic provinces of the World in 2000.
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 506501 = Chattanooga Shale/Floyd Shale-Paleozoic,
50650101 = Pre-Mississippian Carbonates Gas,
50650102 = Carboniferous Sandstones Oil and Gas,
506502 = Pottsville Coal,
50650281 = Black Warrior Basin Coalbed Gas,
This map shows the structural configuration on the top of the Cotton Valley Group in feet below sea level. The map was produced by calculating the difference between a datum at the land surface (either the kelly bushing elevation or the ground surface elevation) and the reported depth of the Cotton Valley Group. This resulted in 10,687 wells for which locations were available. After deleting the wells with obvious data problems, a total of 10,504 wells were used to generate the map. The data are provided as both lines and polygons, and the proprietary wells that penetrate the top of the Cotton Valley Group are graphically displayed as quarter-mile cells. The well information was initially retrieved from the IHS...
The structure contours were created using biostratigraphic data in the Paleo-Data, Inc., Tenroc Regional Geologic Database. The depths of the microfossil locations were associated with the wells data provided by the Louisiana Department of Natural Resources. Because of the proprietary nature of the Tenroc database, no actual data can be shown and only those data points contained in the Louisiana State wells database are included in the control points layer. Contouring was accomplished in Dynamic Graphics, Inc., EarthVision modeling software (v.5) using minimum tension gridding. Three custom programs were used to convert contour lines generated from grids in EarthVision to Arc/Info coverages and then to shapefiles....
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Coal,
Coalbed Methane,
Coalbed methane resources,
Contours,
Earth Science,
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 500501 = Cretaceous-Tertiary Composite,
50050101 = Eastern Oregon and Washington Conventional Gas,
50050102 = Republic Graben Gas,
50050161 = Columbia Basin Continuous Gas,
Brownfield, M. and Tennyson, M.,
An ESRI GRID raster data model of the Mahogany bed structure was needed to perform overburden calculations in the Uinta Basin, Utah and Colorado as part of a 2009 National Oil Shale Assessment.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: CO,
Colorado,
Earth science,
Economic geology,
Energy resources,
The polygon (vector) shapefiles represent Public Land Survey System (PLSS) sections, or 1-square mile areas of land, with information about Bureau of Land Management (BLM) land and mineral use authorizations for oil and gas. The land areas specified by BLM authorizations vary in size and orientation, and may cross one or more PLSS section boundaries. For spatial consistency, the information was aggregated to the square mile PLSS section boundary. The original source data from BLM Cases Recordation database (LR2000) were specific to the day they were generated (March 6, 2016) and subsequent data pulls will likely be different.
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Cadastral,
Gas,
Idaho,
Montana,
Nevada,
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Eastern Great Basin Province is located in western Utah, eastern Nevada, southern Idaho, and the northwest corner of Arizona, encompassing all or parts of Mohave County in Arizona, Power, Bannock, Cassia, Oneida, and Franklin Counties in Idaho, Elko, Eureka, Lander, White Pine, Nye, Lincoln, and Clark Counties in Nevada, and...
This shapefile contains polygons that describe tectonic regions in Afghanistan and adjacent areas.
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Hanna, Laramie, Shirley Basins Province is located in south-central Wyoming and north-central Colorado, encompassing all or parts of Larimer County in Colorado and all or parts of Albany, Carbon, Converse, and Natrona, Counties in Wyoming. The main population centers within the study area are Laramie and Rawlins Wyoming. The...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 30 = Hanna, Laramie, Shirley Basins Province,
503001 = Phosphoria,
50300101 = Tensleep-Casper Conventional Oil and Gas,
50300102 = Mesozoic-Cenozoic Conventional Oil and Gas,
503002 = Mowry-Hanna Composite,
This dataset represents lineaments in the Powder River Basin as identified in the following publication: Maughan, E.K., and Perry, W.J., Jr., 1986, Lineaments and their tectonic implications in the Rocky Mountains and adjacent plains region: in Peterson, J.A., ed, Paleotectonics and Sedimentation in the Rocky Mountain Region, United States: American Association of Petroleum Geologists Memoir 41, pp. 41-56. A lineament is defined as a linear topographic feature of regional extent that is believed to reflect crustal structure (Hobbs et al., 1976, p. 267). Lineament features were transferred from the publication to a hard-copy base map by province geologist, then digitized and referenced for use in a Geographic Information...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503301 = Tertiary-Upper Cretaceous Coalbed Methane,
50330101 = Eastern Basin Margin Upper Fort Union Sandstone,
50330181 = Wasatch Formation,
50330182 = Upper Fort Union Formation,
50330183 = Lower Fort Union-Lance Formations,
|
|
