Geospatial datasets and model for the flood-inundation study of the North Fork Kentucky River at Hazard, Kentucky
Dates
Publication Date
2018-09-14
Time Period
2018
Citation
Boldt, J.A., Lant, J.G., and Kolarik, N.E., 2018, Geospatial datasets and model for the flood-inundation study of the North Fork Kentucky River at Hazard, Kentucky: U.S. Geological Survey data release, https://doi.org/10.5066/P9CNAG9G.
Summary
Digital flood-inundation maps were created for a 7.1-mile reach of the North Fork Kentucky River at Hazard, Kentucky. The flood-inundation maps, which can be accessed through the U.S. Geological Survey (USGS) Flood Inundation Mapping Science website at https://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the North Fork Kentucky River at Hazard, Kentucky (USGS station number 03277500). Near-real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at https://waterdata.usgs.gov/ or the National Weather Service (NWS) Advanced Hydrologic Prediction Service [...]
Summary
Digital flood-inundation maps were created for a 7.1-mile reach of the North Fork Kentucky River at Hazard, Kentucky. The flood-inundation maps, which can be accessed through the U.S. Geological Survey (USGS) Flood Inundation Mapping Science website at https://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the North Fork Kentucky River at Hazard, Kentucky (USGS station number 03277500). Near-real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at https://waterdata.usgs.gov/ or the National Weather Service (NWS) Advanced Hydrologic Prediction Service (AHPS) at https://water.weather.gov/ahps/, which also forecasts flood hydrographs at this site (NWS AHPS site HAZK2). The NWS AHPS forecast peak stage information may be used with the maps developed in this study to show predicted areas of flood inundation.
Flood profiles were computed for the North Fork Kentucky River reach by means of a one-dimensional, step-backwater model developed by the U.S. Army Corps of Engineers. The hydraulic model was calibrated by using the current stage-discharge relation (USGS rating no. 24.0) at USGS streamgage 03277500, North Fork Kentucky River at Hazard, Kentucky. The calibrated hydraulic model was then used to compute 26 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum and ranging from approximately bankfull (14 ft) to the highest even-foot increment stage (39 ft) of the current stage-discharge rating curve. The simulated water-surface profiles were then combined with a geographic information system digital elevation model, derived from light detection and ranging data, to delineate the area flooded at each water level.
The availability of these maps, along with information on the Internet regarding current stage from the USGS streamgage at North Fork Kentucky River at Hazard, Kentucky, and forecasted stream stages from the NWS AHPS, provides emergency management personnel and residents with information that is critical for flood-response activities such as evacuations and road closures, as well as for postflood recovery efforts.
This dataset was created to support the development of flood-inundation maps for a reach of the North Fork Kentucky River at Hazard, Kentucky. The availability of these maps will provide emergency management personnel and residents with information that is critical for flood-management planning, flood-response activities, and postflood recovery efforts.
