Skip to main content
Advanced Search

Filters: Tags: multibeam (X) > Categories: Data (X) > partyWithName: U.S. Geological Survey - ScienceBase (X)

26 results (101ms)   

View Results as: JSON ATOM CSV
thumbnail
These data are high-resolution bathymetry (lake bottom elevation) in a gridded XYZ format, generated from hydrographic surveys of Morse Reservoir in May 2016. Hydrographic data were collected using a multibeam echo-sounder (MBES) with integrated inertial navigation solution (INS) mounted on a marine survey vessel. Data were collected as the vessel traversed the lake along survey lines distributed throughout the area. Data collection software integrated and stored the depth data from the multibeam sonar and the horizontal and vertical position and attitude data of the vessel from the INS in real time. In the shallow areas, additional data were collected with an acoustic Doppler current profiler (ADCP) and a real-time...
thumbnail
Marine geophysical mapping of the Queen Charlotte Fault in the eastern Gulf of Alaska was conducted in 2016 as part of a collaborative effort between the U.S. Geological Survey and the Alaska Department of Fish and Game to understand the morphology and subsurface geology of the entire Queen Charlotte system. The Queen Charlotte fault is the offshore portion of the Queen Charlotte-Fairweather Fault: a major structural feature that extends more than 1,200 kilometers from the Fairweather Range of southern Alaska to northern Vancouver Island, Canada. The data published in this data release were collected along the Queen Charlotte Fault between Cross Sound and Noyes Canyon, offshore southeastern Alaska from May 18 to...
thumbnail
Discharge measurements and velocity mapping surveys were completed at select tie channels located at Nimz Ranch, on the main-stem Kootenai River. Tie channels convey water and sediments between the main river channel and river floodplain waterbodies. The velocity mapping surveys are used to document how the tie channels interact with the main-stem Kootenai River. Similar surveys will be conducted following project construction completion (after 2021). Velocity mapping provides data to support the flow split estimates in the tie channel reconnection. These mapping efforts are a quantitative assessment of the the tie channels role in altering drift, temperature, and floodplain storage. An acoustic Doppler current...
thumbnail
In 2009, the Kootenai Tribe of Idaho released and implemented the Kootenai River Habitat Restoration Master Plan. This plan aimed to restore, enhance, and maintain the Kootenai River habitat and landscape to support and sustain habitat conditions for aquatic species and animal populations. In support of these restoration efforts, the U.S. Geological Survey, in cooperation with the Kootenai Tribe of Idaho, conducted high-resolution multibeam echosounder bathymetric surveys as a baseline bathymetric monitoring survey on the Kootenai River near Bonners Ferry, Idaho. Three channel patterns or reaches exist in the study area: braided, meander, and a transitional zone connecting the braided and meander reaches. Bathymetric...
thumbnail
The Hudson Canyon begins on the outer continental shelf off the east coast of the United States at about 100-meters (m) water depth and extends offshore southeastward across the continental slope and rise. A multibeam survey was carried out in 2002 to map the bathymetry and backscatter intensity of the sea floor of the Hudson Canyon and adjacent slope and rise. The survey covered an area approximately 205 kilometers (km) in the offshore direction, extending from about 500 m to about 4,000 m water depth, and about 110 km in the alongshore direction, centered on the Hudson Canyon. The sea floor was mapped using a SeaBeam Instruments 2112 multibeam echosounder aboard the National Oceanic and Atmospheric Administration...
Categories: Data; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Citation, Downloadable, Map Service; Tags: Coastal and Marine Geology Program (CMGP), Esri binary grid, Hudson Canyon, Middle Atlantic Bight, NOAA ship Ronald H. Brown, All tags...
thumbnail
The Hudson Canyon begins on the outer continental shelf off the east coast of the United States at about 100-meters (m) water depth and extends offshore southeastward across the continental slope and rise. A multibeam survey was carried out in 2002 to map the bathymetry and backscatter intensity of the sea floor of the Hudson Canyon and adjacent slope and rise. The survey covered an area approximately 205 kilometers (km) in the offshore direction, extending from about 500 m to about 4,000 m water depth, and about 110 km in the alongshore direction, centered on the Hudson Canyon. The sea floor was mapped using a SeaBeam Instruments 2112 multibeam echosounder aboard the National Oceanic and Atmospheric Administration...
Categories: Data; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Citation, Downloadable, Map Service; Tags: Coastal and Marine Geology Program (CMGP), GeoTIFF image, Hudson Canyon, Middle Atlantic Bight, NOAA ship Ronald H. Brown, All tags...
thumbnail
Marine geophysical mapping of the Queen Charlotte Fault in the eastern Gulf of Alaska was conducted in 2016 as part of a collaborative effort between the U.S. Geological Survey and the Alaska Department of Fish and Game to understand the morphology and subsurface geology of the entire Queen Charlotte system. The Queen Charlotte fault is the offshore portion of the Queen Charlotte-Fairweather Fault: a major structural feature that extends more than 1,200 kilometers from the Fairweather Range of southern Alaska to northern Vancouver Island, Canada. The data published in this data release were collected along the Queen Charlotte Fault between Cross Sound and Noyes Canyon, offshore southeastern Alaska from May 18 to...
thumbnail
This Data Release contains data from the U.S. Geological Survey (USGS) survey of the Oregon outer Continental shelf (OCS) Floating Wind Farm Site in 2014.The backscatter intensity data was collected along with bathymetry data by USGS during the period from August 20 to September 1, 2014, using a Reson 7111 multibeam echosounder. The mapping mission collected bathymetry data from about 163 m to 566 m depths on the Oregon outer continental shelf. The acquisition was funded by the U.S. Bureau of Ocean Energy Management.Within the final imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic...
thumbnail
The Hudson Canyon begins on the outer continental shelf off the east coast of the United States at about 100-meters (m) water depth and extends offshore southeastward across the continental slope and rise. A multibeam survey was carried out in 2002 to map the bathymetry and backscatter intensity of the sea floor of the Hudson Canyon and adjacent slope and rise. The survey covered an area approximately 205 kilometers (km) in the offshore direction, extending from about 500 m to about 4,000 m water depth, and about 110 km in the alongshore direction, centered on the Hudson Canyon. The sea floor was mapped using a SeaBeam Instruments 2112 multibeam echosounder aboard the National Oceanic and Atmospheric Administration...
Categories: Data; Types: Citation, Downloadable, Map Service, OGC WFS Layer, OGC WMS Layer, Shapefile; Tags: Coastal and Marine Geology Program (CMGP), Hudson Canyon, Middle Atlantic Bight, NOAA ship Ronald H. Brown, National Oceanic and Atmospheric Administration (NOAA), All tags...
thumbnail
This data release contains data from the USGS survey of the Oregon OCS Floating Wind Farm Site in 2014.The bathymetry and shaded-relief rasters were generated from bathymetry data collected by USGS during the period from August 20 to September 1, 2014. using a Reson 7111 multibeam echosounder. The mapping mission collected bathymetry data from about 163 m to 566 m depths on the Oregon outer continental shelf. The acquisition was funded by the U.S. Bureau of Ocean Energy Management.
thumbnail
This data release contains GIS data generated by USGS for use in a BOEM-funded project to compare natural rockfish nursery habitat to habitat created by manmade structures in the eastern Santa Barbara Channel. The contours were created from published data and digital elevation models (DEMs) of Carignan and others (2009) and Dartnell and others (2012). Contours were generated using the ESRI Contour tool in spatial analysit. The contour interval is 10 meters. The contours were clipped to exclude areas outside the BOEM rockfish nurseries study area. Dartnell, P., Finlayson, D.P., Ritchie, A.C., Cochrane, G.R., and Erdey, M.D., 2012, Bathymetry and acoustic backscatter-outer mainland shelf, eastern Santa Barbara Channel,...
thumbnail
This data release contains data from the USGS survey of the Oregon OCS Floating Wind Farm Site in 2014.The shaded-relief raster was generated from bathymetry data collected by USGS during the period from August 20 to September 1, 2014. using a Reson 7111 multibeam echosounder. The mapping mission collected bathymetry data from about 163 m to 566 m depths on the Oregon outer continental shelf. The acquisition was funded by the U.S. Bureau of Ocean Energy Management.
thumbnail
The U.S. Geological Survey (USGS) Inland Bathymetric and Topobathymetric Survey Inventory, v. 3 includes a survey records inventory and dataset footprints (when available) for inland bathymetric and topobathymetric surveys published by the USGS for the conterminous US and Puerto Rico. Survey records include water feature, state, publication title, data vintage, mission, online linkage to reports and datasets, collection methods, survey and survey product resolution, datums, geoid, and accuracy information if known. This database, identified as the USGS Inland Bathymetric and Topobathymetric Survey Inventory, v.3, has been approved for release by the U.S. Geological Survey (USGS). Although this database has been...
thumbnail
The Sandy Hook artificial reef, located on the sea floor offshore of Sandy Hook, New Jersey was built to create habitat for marine life. The reef was created by the placement of heavy materials on the sea floor; ninety-five percent of the material in the Sandy Hook reef is rock. In 2000, the U.S. Geological Survey surveyed the area using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard (CCG) ship Frederick G. Creed. The purpose of this multibeam survey, done in cooperation with the U.S. Army Corps of Engineers when the Creed was in the New York region in April 2000, was to map the bathymetry and backscatter intensity of the sea floor in the area of the Sandy Hook artificial reef. The collected...


map background search result map search result map Oregon OCS bathymetry 10 meter contours Santa Barbara Channel Geohab Oregon OCS backscatter Oregon OCS hillshade GeoTIFF image of the backscatter intensity of the sea floor of the Hudson Canyon region (100-m resolution, Mercator, WGS 84) Bathymetry of the Hudson Canyon region (100-m resolution Esri binary grid and 32-bit GeoTIFF, Mercator, WGS 84) Geomorphic provinces in the Hudson Canyon region (polyline shapefile, geographic, WGS 84) Bathymetry of the Sandy Hook artificial reef (2-m resolution Esri binary grid and 32-bit GeoTIFF, Mercator, WGS 84) Elevation contours, Morris Lake (Newton Reservoir), New Jersey, 2018 Elevation raster, Morris Lake (Newton Reservoir), New Jersey, 2018 Quality-assurance points, Morris Lake (Newton Reservoir), New Jersey, 2018 Elevation-area-capacity tables for Morris Lake (Newton Reservoir), New Jersey, 2018 Depth contours, Morris Lake (Newton Reservoir), New Jersey, 2018 Raster map of interpolated areas of bathymetric maps of Morris Lake (Newton Reservoir), New Jersey, 2018 Multibeam bathymetric data collected in the eastern Gulf of Alaska during USGS Field Activity 2016-625-FA using a Reson 7160 multibeam echosounder (10 meter resolution, 32-bit GeoTIFF, UTM 8 WGS 84, WGS 84 Ellipsoid) Multibeam backscatter data collected in the eastern Gulf of Alaska during USGS Field Activity 2016-625-FA using a Reson 7160 multibeam echosounder (10 meter resolution, 8-bit GeoTIFF, UTM 8 WGS 84, WGS 84 Ellipsoid) Bathymetry of Morse Reservoir near Noblesville, Indiana, 2016 Kootenai River Supplemental Surveys near Bonners Ferry, ID, 2012-2022 Nimz Ranch Tie Channel Velocity Mapping and Discharge Measurements, Kootenai River near Bonners Ferry, ID U.S. Geological Survey Inland Bathymetric and Topobathymetric Survey Inventory, version 3 Elevation-area-capacity tables for Morris Lake (Newton Reservoir), New Jersey, 2018 Quality-assurance points, Morris Lake (Newton Reservoir), New Jersey, 2018 Elevation contours, Morris Lake (Newton Reservoir), New Jersey, 2018 Depth contours, Morris Lake (Newton Reservoir), New Jersey, 2018 Raster map of interpolated areas of bathymetric maps of Morris Lake (Newton Reservoir), New Jersey, 2018 Elevation raster, Morris Lake (Newton Reservoir), New Jersey, 2018 Nimz Ranch Tie Channel Velocity Mapping and Discharge Measurements, Kootenai River near Bonners Ferry, ID Bathymetry of the Sandy Hook artificial reef (2-m resolution Esri binary grid and 32-bit GeoTIFF, Mercator, WGS 84) Bathymetry of Morse Reservoir near Noblesville, Indiana, 2016 Kootenai River Supplemental Surveys near Bonners Ferry, ID, 2012-2022 Oregon OCS backscatter 10 meter contours Santa Barbara Channel Geohab Geomorphic provinces in the Hudson Canyon region (polyline shapefile, geographic, WGS 84) Bathymetry of the Hudson Canyon region (100-m resolution Esri binary grid and 32-bit GeoTIFF, Mercator, WGS 84) GeoTIFF image of the backscatter intensity of the sea floor of the Hudson Canyon region (100-m resolution, Mercator, WGS 84) Multibeam backscatter data collected in the eastern Gulf of Alaska during USGS Field Activity 2016-625-FA using a Reson 7160 multibeam echosounder (10 meter resolution, 8-bit GeoTIFF, UTM 8 WGS 84, WGS 84 Ellipsoid) Multibeam bathymetric data collected in the eastern Gulf of Alaska during USGS Field Activity 2016-625-FA using a Reson 7160 multibeam echosounder (10 meter resolution, 32-bit GeoTIFF, UTM 8 WGS 84, WGS 84 Ellipsoid) U.S. Geological Survey Inland Bathymetric and Topobathymetric Survey Inventory, version 3